Waterbox Lid For: Cube 10 FLED
Add a circular opening with a black or white cap for hand-feeding.
About The Waterbox Cube 10 FLED Lid
- Fits
- Waterbox Cube 10 FLED
- Tank type
- All-in-one (rear filter chamber)
- Cut as
- One panel
- Material
- 3/8″ clear polycarbonate, mesh window
- Price
- Sale: starting at $81.60 (20% off $102.00)
- Shipping
- Free to the contiguous US, usually within a week
This lid is CNC-cut from 3/8″ clear polycarbonate to the outside size of the Waterbox Cube 10 FLED's glass, with a lip that sits inside the glass so it cannot slide and a mesh window in the middle for optimal gas exchange and light penetration. It works as a screen top and jump guard: fish and invertebrates stay in the tank while light and air pass through. The Cube 10 FLED is an all-in-one tank, so the lid covers the display area and stops at the filter chamber wall.
Add a feeding hole with a black or white cap, cutouts for hoses, wires and light mounts, a feeding cup or a removable evaporation cover in the configurator above. You approve a digital proof before anything is cut, and the lid ships free to the contiguous US, usually within a week. If it doesn't fit because of our error, we remake it at no charge.
The Cube 10 FLED is the current Cube 10, and its glass differs slightly from the earlier Cube 10, so it has its own template. The lid covers the display and stops at the rear filter wall, leaving the chamber lids and the return pump in place, and the lip sits inside the glass so it cannot slide.
A Cube 10 is a clownfish pair, a goby and a shrimp for most people, and all three will leave through an open top. Add the feeding hole where you feed and a cutout for the ATO sensor or a light cord if it drops into the display.
Different tank? All Waterbox lids · Build a custom lid from your own measurements
Other Waterbox lids: Cube 20 · Eden 20 · Eden 30 · Eden 40 · EDEN X 60 · EDEN X 80 · EDEN X 80 Peninsula · FRAG 105.4 · FRAG 55.2 · FRAG 85.3 · INFINIA 125.3 · INFINIA 165.4
Waterbox Cube 10 FLED Lid Questions
- Do I have a Cube 10 FLED or the older Cube 10?
- Check the model sticker on the back of the tank. The two are listed separately because the glass is slightly different; if the sticker is gone, send us a photo and we will tell you which template to order.
- Is the Waterbox Cube 10 FLED lid one piece?
- Yes. The Cube 10 FLED lid is a single panel of 3/8-inch clear polycarbonate with a mesh window, so it lifts off in one piece.
- Does the lid come with a feeding hole?
- A capped feeding hole is an option in the configurator: choose a black or white cap and drag the hole to the corner you feed from. A feeding cup that holds food at the surface and a removable evaporation cover over the mesh are optional too.
- Will the lid work with my light?
- In most setups, yes. The lid sits inside the glass below the rim, where arm mounts and clip-on lights attach, and the mesh window passes the light. If a bracket, a hang-on filter or a cord crosses the glass, add a cutout for it in the configurator and it shows on your proof before we cut.
- How long does a Waterbox Cube 10 FLED lid take?
- You approve a digital proof first; the lid is then cut and ships free to the contiguous US, usually within a week of approval.
- What if the Waterbox Cube 10 FLED lid does not fit?
- Every catalog lid is guaranteed to fit the model it is listed for. If it does not fit because of our error, we remake it at no charge.