Red Sea Lid For: MAX NANO G2 Cube
Add a circular opening with a black or white cap for hand-feeding.
About The Red Sea MAX NANO G2 Cube Lid
- Fits
- Red Sea MAX NANO G2 Cube
- Tank type
- All-in-one (rear filter chamber)
- Cut as
- One panel
- Material
- 3/8″ clear polycarbonate, mesh window
- Price
- Sale: starting at $105.60 (20% off $132.00)
- Shipping
- Free to the contiguous US, usually within a week
This lid is CNC-cut from 3/8″ clear polycarbonate to the outside size of the Red Sea MAX NANO G2 Cube's glass, with a lip that sits inside the glass so it cannot slide and a mesh window in the middle for optimal gas exchange and light penetration. It works as a screen top and jump guard: fish and invertebrates stay in the tank while light and air pass through. The MAX NANO G2 Cube is an all-in-one tank, so the lid covers the display area and stops at the filter chamber wall.
Add a feeding hole with a black or white cap, cutouts for hoses, wires and light mounts, a feeding cup or a removable evaporation cover in the configurator above. You approve a digital proof before anything is cut, and the lid ships free to the contiguous US, usually within a week. If it doesn't fit because of our error, we remake it at no charge.
The Max Nano G2 Cube is an all-in-one with its filtration along the back, and the lid is cut to the display section, ending at the rear chamber wall so Red Sea's chamber cover, skimmer and return stay as they are. The lip sits inside the glass and the mesh window passes the ReefLED's light.
The ReefLED arm clamps the back glass above the rim, so the lid clears it. Add the feeding hole where you feed and a cutout if an ATO or a cord drops into the display.
Different tank? All Red Sea lids · Build a custom lid from your own measurements
Other Red Sea lids: MAX NANO G2 Peninsula · MAX NANO G2 XL · MAX NANO G2 XXL · MAX NANO Peninsula (Older Gen) · REEFER 170 (Older Gen) · REEFER 170 G2/G2+/G3 · REEFER 200 G2/G2+/G3 · REEFER 250 (Older Gen) · REEFER 250 G2/G2+/G3 · REEFER 300 G2/G2+/G3 · REEFER 350 G2/G2+/G3 · REEFER 425 G2/G2+ (Rimless)
Red Sea MAX NANO G2 Cube Lid Questions
- Does the Max Nano G2 lid work with the ReefLED mount?
- Yes. The lid sits inside the glass below the rim and the ReefLED arm clamps the back glass above it. Add a cutout if your bracket crosses the glass.
- Does this lid fit the older Max Nano?
- No. The older Max Nano Cube is listed separately because its glass differs. Check the model sticker before ordering.
- Is the Red Sea MAX NANO G2 Cube lid one piece?
- Yes. The MAX NANO G2 Cube lid is a single panel of 3/8-inch clear polycarbonate with a mesh window, so it lifts off in one piece.
- Does the lid come with a feeding hole?
- A capped feeding hole is an option in the configurator: choose a black or white cap and drag the hole to the corner you feed from. A feeding cup that holds food at the surface and a removable evaporation cover over the mesh are optional too.
- Will the lid work with my light?
- In most setups, yes. The lid sits inside the glass below the rim, where arm mounts and clip-on lights attach, and the mesh window passes the light. If a bracket, a hang-on filter or a cord crosses the glass, add a cutout for it in the configurator and it shows on your proof before we cut.
- How long does a Red Sea MAX NANO G2 Cube lid take?
- You approve a digital proof first; the lid is then cut and ships free to the contiguous US, usually within a week of approval.
- What if the Red Sea MAX NANO G2 Cube lid does not fit?
- Every catalog lid is guaranteed to fit the model it is listed for. If it does not fit because of our error, we remake it at no charge.