Waterbox Lid For: Cube 10 (Older Gen)
Add a circular opening with a black or white cap for hand-feeding.
About The Waterbox Cube 10 (Older Gen) Lid
- Fits
- Waterbox Cube 10 (Older Gen)
- Tank type
- All-in-one (rear filter chamber)
- Cut as
- One panel
- Material
- 3/8″ clear polycarbonate, mesh window
- Price
- Sale: starting at $81.60 (20% off $102.00)
- Shipping
- Free to the contiguous US, usually within a week
This lid is CNC-cut from 3/8″ clear polycarbonate to the outside size of the Waterbox Cube 10 (Older Gen)'s glass, with a lip that sits inside the glass so it cannot slide and a mesh window in the middle for optimal gas exchange and light penetration. It works as a screen top and jump guard: fish and invertebrates stay in the tank while light and air pass through. The Cube 10 (Older Gen) is an all-in-one tank, so the lid covers the display area and stops at the filter chamber wall.
Add a feeding hole with a black or white cap, cutouts for hoses, wires and light mounts, a feeding cup or a removable evaporation cover in the configurator above. You approve a digital proof before anything is cut, and the lid ships free to the contiguous US, usually within a week. If it doesn't fit because of our error, we remake it at no charge.
This is the template for the original Cube 10, before the FLED version; the glass differs slightly between the two, so they are listed separately. The lid covers the display and stops at the rear filter wall, so the chamber lids and return pump stay in place, and the lip inside the glass keeps it from sliding.
Different tank? All Waterbox lids · Build a custom lid from your own measurements
Other Waterbox lids: Cube 10 FLED · Cube 20 · Eden 20 · Eden 30 · Eden 40 · EDEN X 60 · EDEN X 80 · EDEN X 80 Peninsula · FRAG 105.4 · FRAG 55.2 · FRAG 85.3 · INFINIA 125.3
Waterbox Cube 10 (Older Gen) Lid Questions
- Which Cube 10 do I have?
- Look for the model sticker on the back glass. If it says FLED, order the Cube 10 FLED lid instead; if you are not sure, send us a photo and we will confirm.
- Is the Waterbox Cube 10 (Older Gen) lid one piece?
- Yes. The Cube 10 (Older Gen) lid is a single panel of 3/8-inch clear polycarbonate with a mesh window, so it lifts off in one piece.
- Does the lid come with a feeding hole?
- A capped feeding hole is an option in the configurator: choose a black or white cap and drag the hole to the corner you feed from. A feeding cup that holds food at the surface and a removable evaporation cover over the mesh are optional too.
- Will the lid work with my light?
- In most setups, yes. The lid sits inside the glass below the rim, where arm mounts and clip-on lights attach, and the mesh window passes the light. If a bracket, a hang-on filter or a cord crosses the glass, add a cutout for it in the configurator and it shows on your proof before we cut.
- How long does a Waterbox Cube 10 (Older Gen) lid take?
- You approve a digital proof first; the lid is then cut and ships free to the contiguous US, usually within a week of approval.
- What if the Waterbox Cube 10 (Older Gen) lid does not fit?
- Every catalog lid is guaranteed to fit the model it is listed for. If it does not fit because of our error, we remake it at no charge.