Innovative Marine Lid For: Fusion 14 AIO Peninsula
Add a circular opening with a black or white cap for hand-feeding.
About The Innovative Marine Fusion 14 AIO Peninsula Lid
- Fits
- Innovative Marine Fusion 14 AIO Peninsula
- Tank type
- All-in-one, peninsula
- Cut as
- One panel
- Material
- 3/8″ clear polycarbonate, mesh window
- Price
- Sale: starting at $94.40 (20% off $118.00)
- Shipping
- Free to the contiguous US, usually within a week
This lid is CNC-cut from 3/8″ clear polycarbonate to the outside size of the Innovative Marine Fusion 14 AIO Peninsula's glass, with a lip that sits inside the glass so it cannot slide and a mesh window in the middle for optimal gas exchange and light penetration. It works as a screen top and jump guard: fish and invertebrates stay in the tank while light and air pass through. The Fusion 14 AIO Peninsula is an all-in-one tank, so the lid covers the display area and stops at the filter chamber wall.
Add a feeding hole with a black or white cap, cutouts for hoses, wires and light mounts, a feeding cup or a removable evaporation cover in the configurator above. You approve a digital proof before anything is cut, and the lid ships free to the contiguous US, usually within a week. If it doesn't fit because of our error, we remake it at no charge.
The Fusion 14 Peninsula has its filter chamber on the short end, so the tank is viewed from three sides and the lid is shaped for it: it covers the display and stops at the chamber wall on the end, leaving IM's chamber lids and return in place. The lip sits inside the glass.
Because the chamber is at the end, you choose which corner the feeding hole goes in when you configure the lid, so it lands on the side you feed from.
Different tank? All Innovative Marine lids · Build a custom lid from your own measurements
Other Innovative Marine lids: Fusion 15 AIO Cube · Fusion 20 AIO · Fusion 20 AIO Long · Fusion 20 AIO Peninsula · Fusion 25 AIO Lagoon · Fusion 30L AIO · Fusion 40 AIO · Fusion 40L AIO · Fusion 50 AIO Lagoon · SR 120 AIO · SR 60 AIO · SR 80 AIO
Innovative Marine Fusion 14 AIO Peninsula Lid Questions
- Is the Peninsula lid different from the Fusion 15 Cube lid?
- Yes. The Peninsula's chamber is on the short end rather than the back, so the lid is a different shape. Order the lid that matches the model printed on your tank.
- Is the Innovative Marine Fusion 14 AIO Peninsula lid one piece?
- Yes. The Fusion 14 AIO Peninsula lid is a single panel of 3/8-inch clear polycarbonate with a mesh window, so it lifts off in one piece.
- Does the lid come with a feeding hole?
- A capped feeding hole is an option in the configurator: choose a black or white cap and drag the hole to the corner you feed from. A feeding cup that holds food at the surface and a removable evaporation cover over the mesh are optional too.
- Will the lid work with my light?
- In most setups, yes. The lid sits inside the glass below the rim, where arm mounts and clip-on lights attach, and the mesh window passes the light. If a bracket, a hang-on filter or a cord crosses the glass, add a cutout for it in the configurator and it shows on your proof before we cut.
- How long does a Innovative Marine Fusion 14 AIO Peninsula lid take?
- You approve a digital proof first; the lid is then cut and ships free to the contiguous US, usually within a week of approval.
- What if the Innovative Marine Fusion 14 AIO Peninsula lid does not fit?
- Every catalog lid is guaranteed to fit the model it is listed for. If it does not fit because of our error, we remake it at no charge.