Innovative Marine Lid For: SR 80 AIO
This lid ships as two panels that butt together at the seam. Your tank has a rear overflow, so we recommend seam support standoffs — we'll include them and a note with your order.
Add a circular opening with a black or white cap for hand-feeding.
About The Innovative Marine SR 80 AIO Lid
- Fits
- Innovative Marine SR 80 AIO
- Tank type
- All-in-one (rear filter chamber)
- Cut as
- 2 panels
- Material
- 3/8″ clear polycarbonate, mesh window
- Price
- Starting at $287.50
- Shipping
- Free to the contiguous US, usually within a week
This lid is CNC-cut from 3/8″ clear polycarbonate to the outside size of the Innovative Marine SR 80 AIO's glass, with a lip that sits inside the glass so it cannot slide and a mesh window in the middle for optimal gas exchange and light penetration. It works as a screen top and jump guard: fish and invertebrates stay in the tank while light and air pass through. The SR 80 AIO is an all-in-one tank, so the lid covers the display area and stops at the filter chamber wall. It is longer than one panel, so it is cut as 2 panels that butt together at a seam.
Add a feeding hole with a black or white cap, cutouts for hoses, wires and light mounts, a feeding cup or a removable evaporation cover in the configurator above. You approve a digital proof before anything is cut, and the lid ships free to the contiguous US, usually within a week. If it doesn't fit because of our error, we remake it at no charge.
Different tank? All Innovative Marine lids · Build a custom lid from your own measurements
Other Innovative Marine lids: EXT 100 · EXT 30 Long · EXT 50 Lagoon · EXT 75 · Fusion 10 AIO · Fusion 14 AIO Peninsula · Fusion 15 AIO Cube · Fusion 20 AIO · Fusion 20 AIO Long · Fusion 20 AIO Peninsula · Fusion 25 AIO Lagoon · Fusion 30L AIO
Innovative Marine SR 80 AIO Lid Questions
- Does the Innovative Marine SR 80 AIO lid cover the filter chamber?
- No. It covers the display glass and stops at the rear filter chamber wall, so the factory chamber covers, pump and media stay as they are. If you want the chamber covered as well, build a custom lid from the tank's full outside dimensions.
- Is the Innovative Marine SR 80 AIO lid one piece?
- No. The SR 80 AIO is longer than one panel, so the lid is cut as 2 panels that butt together at a flat seam. Each panel has its own mesh window and lip, and you can lift one at a time to feed or scape.
- Does the lid come with a feeding hole?
- A capped feeding hole is an option in the configurator: choose a black or white cap and drag the hole to the corner you feed from. A feeding cup that holds food at the surface and a removable evaporation cover over the mesh are optional too.
- Will the lid work with my light?
- In most setups, yes. The lid sits inside the glass below the rim, where arm mounts and clip-on lights attach, and the mesh window passes the light. If a bracket, a hang-on filter or a cord crosses the glass, add a cutout for it in the configurator and it shows on your proof before we cut.
- How long does a Innovative Marine SR 80 AIO lid take?
- You approve a digital proof first; the lid is then cut and ships free to the contiguous US, usually within a week of approval.
- What if the Innovative Marine SR 80 AIO lid does not fit?
- Every catalog lid is guaranteed to fit the model it is listed for. If it does not fit because of our error, we remake it at no charge.