Red Sea Lid For: MAX 130D
Add a circular opening with a black or white cap for hand-feeding.
About The Red Sea MAX 130D Lid
- Fits
- Red Sea MAX 130D
- Tank type
- All-in-one (rear filter chamber)
- Cut as
- One panel
- Material
- 3/8″ clear polycarbonate, mesh window
- Price
- Starting at $136.00
- Shipping
- Free to the contiguous US, usually within a week
This lid is CNC-cut from 3/8″ clear polycarbonate to the outside size of the Red Sea MAX 130D's glass, with a lip that sits inside the glass so it cannot slide and a mesh window in the middle for optimal gas exchange and light penetration. It works as a screen top and jump guard: fish and invertebrates stay in the tank while light and air pass through. The MAX 130D is an all-in-one tank, so the lid covers the display area and stops at the filter chamber wall.
Add a feeding hole with a black or white cap, cutouts for hoses, wires and light mounts, a feeding cup or a removable evaporation cover in the configurator above. You approve a digital proof before anything is cut, and the lid ships free to the contiguous US, usually within a week. If it doesn't fit because of our error, we remake it at no charge.
Different tank? All Red Sea lids · Build a custom lid from your own measurements
Other Red Sea lids: MAX E-170 · MAX E-260 · MAX NANO Cube (Older Gen) · MAX NANO G2 Cube · MAX NANO G2 Peninsula · MAX NANO G2 XL · MAX NANO G2 XXL · MAX NANO Peninsula (Older Gen) · REEFER 170 (Older Gen) · REEFER 170 G2/G2+/G3 · REEFER 200 G2/G2+/G3 · REEFER 250 (Older Gen)
Red Sea MAX 130D Lid Questions
- Does the Red Sea MAX 130D lid cover the filter chamber?
- No. It covers the display glass and stops at the rear filter chamber wall, so the factory chamber covers, pump and media stay as they are. If you want the chamber covered as well, build a custom lid from the tank's full outside dimensions.
- Is the Red Sea MAX 130D lid one piece?
- Yes. The MAX 130D lid is a single panel of 3/8-inch clear polycarbonate with a mesh window, so it lifts off in one piece.
- Does the lid come with a feeding hole?
- A capped feeding hole is an option in the configurator: choose a black or white cap and drag the hole to the corner you feed from. A feeding cup that holds food at the surface and a removable evaporation cover over the mesh are optional too.
- Will the lid work with my light?
- In most setups, yes. The lid sits inside the glass below the rim, where arm mounts and clip-on lights attach, and the mesh window passes the light. If a bracket, a hang-on filter or a cord crosses the glass, add a cutout for it in the configurator and it shows on your proof before we cut.
- How long does a Red Sea MAX 130D lid take?
- You approve a digital proof first; the lid is then cut and ships free to the contiguous US, usually within a week of approval.
- What if the Red Sea MAX 130D lid does not fit?
- Every catalog lid is guaranteed to fit the model it is listed for. If it does not fit because of our error, we remake it at no charge.